If Your Hot Water System Fails: Immediate Response
If Your Hot Water System Fails: Immediate Response
Blog Article
We've found this great article about What Would Cause My Electric Water Heater to Stop Working? directly below on the web and felt it made perfect sense to write about it with you in this article.
Numerous contemporary residences use an electric water heater for their heating system, as a result of its convenience as well as ease of use. Nonetheless, much like any other electrical devices, problems might develop with its use, all of a sudden. It can be actually frustrating to wake up to a cold shower rather than a warm one or having your bath with water that isn't hot adequate or even as well warm. Whatever the instance might be, water heater problems can be fairly aggravating. The good news is, we've made a listing of feasible solutions to your hot water heater concerns. There are a number of variables that might trigger a lot of these issues, it could be a concern with the power supply, the electric heating element, or the thermostat. Before doing anything, ensure you turn off the major power supply for safety and security. Whatever the trouble is, getting it fixed must not posture way too much of an issue if you follow these steps:
Call A Specialist:
If after replacing all defective parts and resetting your temperature level, the water heater still isn't functioning, you might need to speak to a specialist plumber for an expert point of view. The issue with your heating unit could be that the cold and hot faucets have been switched over or it may be undersized for the quantity of hot water needed in your home. Whatever the case might be, an expert plumber would certainly help solve the problem.
Check Your Power Supply:
As fundamental as this may seem, it is very required. Without adequate power, your water heater will certainly not work. So the first thing to do when your water suddenly stops working is to validate that it isn't a power issue. Check if the fuse is blown out or the breaker tripped. If the breaker is the concern, merely turn it off and on again. Replace any kind of busted or worn-out fuse. Examine the appliance with power after these changes to see if it's currently functioning.
Inspect Your Thermostat:
If your water heater still isn't functioning or the water appearing isn't warm enough, you might need to examine the temperature level settings on your upper thermostat. Guarantee the breaker is turned off before doing anything. Open up the accessibility panel and also press the red button for temperature level reset above the thermostat. This should assist warm the water. Transform the circuit breaker back on and inspect if the issue has been dealt with.
Check the Burner in the Water Heater:
If it's not a power issue, after that try looking into your heating element if it is still functioning. Examine each of your heating elements to be sure the trouble isn't with any one of them. If any one of them is faulty, change that part and afterwards check whether the hot water is back on.
Final thought
Hot water heater issues are not always major. A number of them result from small problems like a blown fuse or damaged burner. Changing the faulty components ought to work. Nevertheless, if you are still not able to resolve the issue, give a call to your nearby plumber to come to get it fixed.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Hopefully you liked our article on Hot Water Heater Repair. Thanks a lot for finding the time to browse our article. Enjoyed our blog posting? Please share it. Let others check it out. Many thanks for going through it.
Preventative solutions offered. Report this page